Questions & Answers

Home | Masking Tools | Testimonies | Suppliers | Recommendations | Tips | Order

How much downward pressure do I need to apply to the Big Squeegee? None. With the hinge method, just push it across to apply. Putting pressure downward on the squeegee will create an uneven pressure on the squeegee which could distort it enough to give undesirable results. The back side of the squeegee has to be raised up so that the squeegee is about 40 degrees to the substrate in most cases. You will develop your own techniques as you work with the Big Squeegee.

What is the difference between the Cut Vinyl series and Rivet/Dent series? The main difference is how the tools apply trnsfer tape. The Rivet/Dent tool does not have a roll holder so it can only push the roll of tape over the graphic. The Cut Vinyl tool allows the tape to be placed in the roll holder so the roll does not need to be pushed over the graphic. Both tools have unlimited length of masking capabilities. The only time that you woud use the roll in the roll holder would be when you have fine cut graphic that may otherwise get moved in the taping process. Other differences; The Rivet/Dent series has a paded edge so it will install over small objects without slowing down. The roll holder on the Cut Vinyl tool helps to handle long pieces of vinyl. The Rivet/Dent tool is limited to shorter signs.

What is the difference between the Rivet/Dent series and Yard Sign series? One edge on the Yard Sign series is for laminating where the same edge on the Rivet/Dent series is for working with rivets and other such obstickles. The other edge on both tools are for applying transfer tape.

Will the laminator series apply masking? It will work with some transfer tapes but not so well with others. You can get it started and apply it from the roll holder on the front or back. However, I don't recommend it. It can be used to apply the light tac paper tape to protect the prints from scatches during installation.

Can I apply vinyl that is wider than the Big Squeegee? No! The principals behind the Big Squeegee is to span the whole width all at once. Anything not covered by the squeegee will have bubbles and/or wrinkles.

Why can't I get the DVD to play? The DVD's are all made in a stamping process. If you can't get it to play in one system, try it in another one. It is a DVD and some computers won't play it even though it plays DVD's. A new one won't work any better. We are getting new ones made. If you can't get sound, play with the treble and base.

How long will the Big Squeegee last? There are some tools that are still in use that are over 2 years old. The felt is replaceable. The new satin covering is a lot less changeable. The satin covering is new enough that we don't know how long it will last. When it does wear a little thin a new layer of satin tape will extend its life.

My distributor does not list the size I need. Where else can I get it? Some distributors have chosen not to carry the full line of the Big Squeegee. If they don't list it, they don't stock it. I don't get any feedback from the distributors as to what they have on hand so I don't know who has it in stock. We're getting new distributors so check out the suppliers page for one near you.

What are the limits of what the big Squeegee can do? The big Squeegee needs a flat surface in one direction to work on. It has been used to apply vinyl to box trucks and windows. We show horizontal installs in the video but many of our customers use it for vertical installs as well. It won't work on complex curves. We have found that the length limit is about 70" for one person so we only make them to 64".

Will it help to apply wet? Some like to use a small amount of application fluid on 4 X 8 sheets for their own sense of safety. Most users apply everything dry.

What is silvering? Silvering is a term used in laminating with a clear vinyl. You can see through the vinyl to see the underlying layer of glue. If the glue has not fully attached to the substrate, the result is what appears as tiny little bubbles. This is not caused by air trapped but rather the glue boundaries. The silvering will go away either over night or with application of more pressure. If you plan to install the vinyl, the installation will provide enough pressure to get rid of the silvering.

What is the learning curve for the Big Squeegee? Most users will watch the video and make their first install without any problems. I find that the ones that have the most problems are those that have been using four inch squeegees for such a long time that they have difficulty dealing with the idea that you don't need to apply a lot of pressure. The Big Squeegee will make it possible for new personnel to mount vinyl with very little instruction and achieve professional results.

Does the "you get what you pay for" apply? The Big Squeegee concept is so simple that we feel that the price is adequate for our production needs. The lower priced roll laminators are much slower on small jobs and less successful. They are not as flexible either. I don't know of any roll laminator that will apply the vinyl to the side of a truck or on a store window. The big Squeegee is a tool in a class of its own.. You get way more than you pay for on the Big Squeegee.

I have a roll laminator, do I need a Big Squeegee? It can be used as a companion to the more expensive roll laminators. It is far easier to laminate something on a table rather than changing out laminate for a small job. You could be done in less time than it would take to re-web a roll laminator. It also makes a good back up for when the roll laminator is down for repairs or the person that normally does the laminating is not around.

What materials work best with the Big Squeegee? Most vinyls work well with the Big Squeegee. Window tint will not work We recommend that you avoid products with a thin release liner. It is possible to get Origuard 210 and 290 to work but you will need to help the backing off with a free hand or have a helper pull it off. There are other products that could be used in place of Origuard that will apply much easier. Origuard may have a lower price tag than some of the other laminates but it will get expensive fast if it ruins prints.