| Home | Q & A | Testimonies | Suppliers | Prices | Recommendations | Tips |

There are three types of Big Squeegees that will apply transfer tape.

Cut Vinyl Squeegee or Tape Application Tool is an all-around tool for applying transfer tape and mounting vinyl. It can be used for mounting and laminating printed graphics. The standard size for this tool is 26 and 32 inches. Both front and back edges have replaceable felt. The rear edge allows you to mask multiple small pieces and gets the roll off the table for masking over finely cut graphics.

Recommendations
Best all around tool for cut vinyl.
The length should be at least 2 inches longer than the width of your masking.

Masking Demo

To order, Ask for 2-26 or 2-32. Where 2 is the type (cut vinyl tool) and 26 or 32 is the length in inches.

Rivet/Dent Squeegee is for masking graphics & mounting graphics over rivets, grommets and irregular surfaces. The rivet/dent edge is not used as much as the other edge which is used for applying application tape to cut vinyl and mounting small graphics. Comes in sizes 10, 18, and 26 inches.

Recommendations
For vehicle graphics and places that have obstacles such as rivets & grommets.

Rivet/Dent Video

When ordering, ask for the 3 series (Rivet/Dent tool.)

Recommendations
For use with small signs less than 36" long and the width of the squeegee less 2".
Can also be used on windows and other vertical applications.

Yard Sign Video

When ordering, ask for the 4 series (Yard Sign Tool)

Other notes

The roll holder is for managing long graphics and adds to rigidity of the squeegee. It has other functions such as dispensing roll materials and controlling rolls on the table top.

Set the roll of masking in the roll holder and use it as a paperweight while weeding

All Big Squeegees will mount over masking that is overlapping without leaving lines. Hard squeegees leave lines of air bubbles. A good tool for layering vinyl.

Good tools for layering graphics!